How Is the Torah Made?
An authentic Torah scroll is a mind-boggling masterpiece of labor and skill. Comprising between 62 and 84 sheets of parchment-cured, tanned, scraped and prepared according to exacting Torah law specifications-and containing exactly 304,805 letters, the resulting handwritten scroll takes many months to complete. An expert pious scribe carefully inks each letter with a feather quill, under the intricate calligraphic guidelines of Ktav Ashurit (Ashurite Script). The sheets of parchment are then sewn together with sinews to form one long scroll. While most Torah scrolls stand around two feet in height and weigh 20-25 pounds, some are huge and quite heavy, while others are doll-sized and lightweight.
The Parchment
(Photo: Beis Yisroel Torah Gemach)
A Torah scroll may only be written on parchment from the skin of a kosher animal. However, the animal need not necessarily be slaughtered in a ritually acceptable manner. As long as the species is kosher, the parchment may be used for a Torah scroll. Parchment made of fish skin cannot be used for this purpose; fish skin exudes an unpleasant odor which is not becoming to a Torah scroll. The parchment must be prepared with the intention that it be used for a Torah scroll. Therefore, a Jew must carry out or, at the very least, assist in this task.
Before beginning to write a Torah scroll, the scribe must mark off the lines on the parchment with slight grooves. The utensil used for this purpose may not leave any coloring on the parchment. It is preferable that this marking, too, be carried out with the intent to write a Torah scroll.
The Ink
Only black ink is acceptable. Ink of any other color is not kosher for a Torah scroll.
In ancient times, the ink used for writing a Torah scroll was obtained by boiling oils, tar and wax, and collecting the vapors. Afterwards, that mixture would be combined with tree sap and honey, and then dried out and stored. Before its use, it would be mixed with gall-nut juice.
Nowadays, scribes prepare ink using gall-nut juice and gum. The black color is achieved by adding various tints.
The Quill
Inscribing the final word, “Israel,” referring to the Jewish people (Photo: Andrew Taylor)
The scribe writes with a feather pen or reed pen, filling its tip from the ink. An iron pen is not proper for two reasons:
1. It may puncture the parchment.
2. Iron is often used to make weapons of death and destruction, both of which oppose the intent of the Torah.
The Calligraphy
STaM script according to the tradition of Admor Hazaken.
The letters of a Torah scroll are written in the "Assyrian" script; the various scripts or fonts in which Hebrew is commonly written or printed are not valid. The lines must be perfectly straight and even. Numerous laws detail the precise figure of each letter, and if even one letter is missing, or in some instances, merely cracked or smudged, the entire Torah scroll is not kosher A printed Torah scroll, even if its letters conform to the required form, is not valid.
Because the Torah scroll embodies the holiness of its message, it should focus exclusively on its pure text; any illustrations or artistic decorations are forbidden.
The Scribe (Sofer)
Rabbi Faitel Lewin busy at work. (Photo: Eliyahu Parypa for Chabad.org)
To become a scribe requires rigorous study and training-and great skill. Certainly, a person who has not carefully studied the laws pertaining to composing a Torah scroll cannot be a scribe. Above all, however, the scribe must be a G‑d-fearing and pious person, dedicated to the sanctity of the Torah scroll.
The scribe may not rely on his memory, but must copy the letters, word by word, from a kosher Torah scroll or a copy of a certified Kosher scroll. A right-handed scribe writes only with his right hand; a left-handed scribe, only with his left hand.
The Torah scroll, and especially the Names of G‑d contained therein, must be written with utmost purity and devotion. It is therefore customary that the scribe immerse himself in a Mikvah (ritual pool) before beginning his work. He also recites a blessing at the outset of his work and before each time he writes the Name of G‑d.
Atzei Chayim: The Torah Rollers
The Torah scroll is rolled around two wooden dowels.
(Hebrew, pl., trees of life; sing., aitz chayim) The atzei chayim are the two wooden shafts attached to either end of the Torah scroll, around which it is rolled. Each shaft is made long enough to extend beyond the top and bottom of the scroll, and is used as a handle with which to hold the Torah scroll and to scroll from portion to portion.
Gartel: The Torah Sash
The Torah is bound tight with the gartel (sash).
(Yiddish, belt) The gartel is the sash used to tie the Torah scroll so that the Torah remains closed and secured under its velvet covering. When a Torah scroll is found to be non-kosher (e.g., a letter has faded) and awaits correction, its gartel is tied around its velvet covering, on the outside, as an ostensible reminder that it is out of commission.
Mantel: The Torah Dress
(Yiddish, cloak) A valuable treasure is not left exposed and vulnerable. We cover the Torah scroll with multiple coverings, dressing it in a "cloak" before restoring it to its honorable place in the Ark and drawing the curtain. The mantel is an ornate covering that both protects and beautifies the Torah scroll, typically made of velvet and embroidered with golden thread, silk, and ornamental beads.
Keter: The Crown
The Torah crown.
(Hebrew, crown) The Torah is our most precious possession, and we lovingly display that. We adorn it with a crown, typically silver, as a symbol of our endearment and veneration. The keter rests on the wooden shafts, which extend above the scroll.
Yad: The Pointer
A yad, used to point during the reading of the Torah.
(Hebrew, hand) The yad is the pointer that the reader of the Torah uses to help others follow the written words as he reads. Usually made of silver, the end of this rod is commonly shaped like a hand with its index finger extended. A chain attached to its other end can be used to drape it over the Torah scroll when put away.